Technical Data
| Appearance | Semi-transparent liquid |
| Viscosity | 15,000–22,000 CPS (NDJ-4, 4#/12rpm/25℃) |
| Solid Content (%) | 31 |
| pH | 7.0–9.0 |
| Storage Temperature | 5℃–35℃ |
Key Features
- Can be directly applied on existing walls with leakage problems — no need to remove the old finish.
- Non-tacky, dust-resistant, and non-yellowing after curing; excellent durability.
- Resistant to heat, UV rays, acid, alkali, and aging.
- Forms an elastic, strong-adhering film that tolerates substrate deformation and cracking.
- Water-based formulation with no solvent pollution — environmentally friendly and safe.
Application Method
- Surface Cleaning
Clean the wall surface thoroughly with detergent, brush, or cloth to remove dust and stains. - Base Treatment
Ensure the substrate is clean, flat, firm, and dry. Level uneven areas and seal cracks or leaks before coating. - Coating Application
Apply evenly over the wall and between tile joints. - Layering
Apply 2–3 coats. Each coat should dry to the touch before applying the next, with alternating directions (vertical and horizontal).
Recommended Uses
- Waterproof repair for exterior walls of buildings.
- Waterproofing at joints between decorative materials.
- Waterproof, moisture-proof, and mildew-proof coating for interior and exterior walls.
- Protective topcoat for color steel roofing systems.
- Concrete structures requiring waterproof and anti-carbonation protection.
