Technical Data
| Tensile Strength (MPa) | 1.6 |
| Elongation at Break (%) | 345 |
| Impermeability (0.3MPa, 30min) | No Leakage |
| Solid Content (%) | 69 |
| Drying Time (h) | Surface Dry ≤ 4h; Fully Dry ≤ 8h |
| Low Temperature Flexibility (Ø10mm rod) | -20°C, No Cracks |
| Thermal Expansion Rate | Elongation ≤ 1.0; Shrinkage ≤ 1.0 |
Key Features
- Superior Elasticity & Adhesion – Rubber-like flexibility with strong tensile and crack resistance.
- Excellent Durability – Waterproof, anti-aging, and weather-resistant for long-term protection.
- Direct Exposure Finish – Can be used as a decorative surface when fully cured; available in multiple colors.
- Eco-Friendly Formula – Low VOC content and safe for indoor and outdoor use.
Application Method
- Surface Preparation
Ensure the substrate is clean, firm, and free from dust, oil, or moisture. - Base Treatment
Fill gaps or cracks and reinforce weak areas with primer or additional coating. - Coating Application
Apply the liquid rubber coating evenly in multiple thin layers. Allow each layer to dry before applying the next to achieve the desired film thickness.
Precautions
- Avoid applying too thick in a single coat; use multiple thin layers for optimal waterproof performance.
- If bubbles appear due to humidity or uneven coating, wait until dry, then reapply after removing bubbles.
- Do not expose the coated surface to water or rain within 48 hours after application.
Product Advantages at a Glance
- Excellent crack-bridging ability and tensile strength.
- Reliable adhesion on concrete, brick, and metal substrates.
- High weather and UV resistance for roof and wall protection.
- Seamless waterproof membrane with strong elasticity.
- Environmentally friendly and easy to apply.
Recommended Uses
- Roof waterproofing and renovation
- Exterior wall protection
- Bathrooms and basements
- Balconies, terraces, and other exposed concrete surfaces
